|
Slag Experts| The following experts are available as slag consultants and slag expert witnesses. Intota experts are peer-recommended authorities who have been carefully selected and rigorously screened. | |
| | Definition: Slag -
A nonmetallic material produced from the mutual dissolving of flux and nonmetallic impurities in smelting, refining, and some welding operations. In steelmaking, the floating layer of slag protects the underlying molten metal from the air and extracts certain impurities. Synonyms: bloom |
|
|
| 1 to 25
(of 40) | | | | Request Free
Expert Quote | | |  | | Expert in Hydrometallurgy, Pyrometallurgy, and Extraction and Recycling of Metal-Containing Raw Materials
Expert has in-depth experience on molybdenum recovery and rhenium recovery (includes six patents and papers): pressure leaching of molybdenite (molybdenum disulfide) concentrates, ammonium dimolybdate (ADM) production, ... See full profile | | Colorado (CO), USA  | | | |  | | Expert in Steel and Iron Casting Processes, Foundry Consulting, Metallurgy, and NDT Non Destructive Testing
Expert has extensive foundry experience with a strong emphasis in melting steel using both acid and basic processes. He developed metallurgical and operational melting procedures that optimized the acid and basic slags. He is very familiar with the use ... See full profile | | Wisconsin (WI), USA | | | |  | | Expert in Pyrometallurgical Processes, Ferroalloy Smelting, AC-DC-Induction-Cupola Faces
Expert has applied his metallurgical engineering background to design novel processes, optimize energy consumption and efficiencies in smelter plants, resource evaluation and techno-economic modelling of metallurgical operations. See full profile | | Gauteng, South Africa | | | |  | | Expert in Coal Combustion, Fossil Fuel Combustion, Biomass Combustion, Pollution Control, Renewable Energy
Expert has over 30 years experience in the fields of combustion, air & water pollution control, and renewable energy. Within combustion he has particular expertise with coal, fossil fuels, and biomass. He has experience in both industry as well as ... See full profile | | Virginia (VA), USA | | | |  | | Expert in Gasification & Pyrolysis of Coal, Biomass and Wastes.
Expert has 18 years of research supervision experience with the University of N.Dakota Energy Research center, dealing with lab scale to large pilot scale coal gasification. This dealt mainly with bituminous and subbituminous coals, and extension of same ... See full profile | | Minnesota (MN), USA | | | |  | | Expert in Engineering: Mining, Minerals, Metallurgy, Chemicals, Materials, and Energy- Especially Fuels
Expert is a professionally registered engineer with 28 years of experience in process, chemical and metallurgical engineering, engineering services, research, consulting and industrial plant operations. Experienced and trained in ... See full profile | | Montana (MT), USA | | | |  | | Expert in Extractive-Metallurgy, Hydro-Metallurgy, Pyro-Metallurgy, Inorganic Processing and Soil and Waste Remediation
Expert has been active in the field of extractive metallurgy for more than 42 years. He has developed processes for the recovery of many metals including antimony, arsenic, barium, bismuth, boron, chromium, cobalt, copper, gallium, germanium, gold, ... See full profile | | Colorado (CO), USA | | | |  | | Expert in Construction Materials
Since retiring from W.R. Grace & Company in 1997, Expert has been a Guest Researcher at the National Institute of Standards studying the durability of materials. He also is a consultant for a number of companies, e.g. See full profile | | Maryland (MD), USA | | | | | | Expert in Protective Coatings, Paint
With over 30 years of experience, Expert has expertise in many aspects of protective coatings. His primary emphasis has been on the evaluation, selection, specification, and application of coating materials that are used for ... See full profile | | Pennsylvania (PA), USA | | | |  | | Expert in Glass and Ceramic Materials
Much of Expert's career has been involved with glass, especially with the development and processing of new glass compositions with specific properties, the conversion of glass to crystalline material to form glass-ceramics with the attendant ... See full profile | | Illinois (IL), USA | | | |  | | Expert in steel and material handling
Expert has had operational management positions in blast furnace, coke oven, EAF steelmaking, continuous casting and hot rolling mills. Following on from the career in the direct steel industry, Expert has had ten years consulting experience in the steel and ... See full profile | | United Kingdom | | | |  | | Expert in Titanium Welding, Zirconium Welding, Hastaloy Welding, Stainless Steel Welding
After obtaining government certification danny has used his extensive knowledge and practical experiance to complete and teach fusion welding on such items as Heat exchangers for the pulp and paper and petro-chemical industries, and high pressure vessels. See full profile | | Quebec, Canada | | | | | | Expert in Welding, Fabrication, Piping, Pressure Vessels, Shipbuilding, Brazing, Heat / Flame Straightening
He has successfully qualified hundreds of welding procedure qualifications for seam welding. Most notably he has worked with pipe manufacturers in Mexico to implement a 4 wire SAW process for piping longseams. He has been involved with all types of seam ... See full profile | | New York (NY), USA | | | |  | | Expert in Resistance Welding, Laser Welding, Arc Welding, Ultrasonic Welding, Brazing, and Soldering
He has extensive experience in brazing starting with his PhD (Penn State) in brazing of structural ceramics. He worked on the Alumnia-Titanium system using an active braze alloy of Ag-Cu-Ti composition. Active brazing has found wide acceptance in brazing ... See full profile | | California (CA), USA | | | |  | | Expert in Economic Analysis, Feasibility Studies, Project Management, Non ferrous metals, chemical metallurgy
Much of Expert's career has been spent in hydrometallurgy and aqueous corrosion. Both require knowledge and experience in aqueous metal chemistry, inorganic chemistry, and electrochemistry in a process environment. Much of Expert's career has been ... See full profile | | Maryland (MD), USA | | | |  | | Expert in Cement Process Technology, Process Engineering and Design, Energy Audit, Environmental System
Mr. B. Expert can evaluate the potential energy consumption levels of individual pieces of equipment and produce the optimum process condition. Expert notes that chemical plant design require special skills which he possesses through his ... See full profile | | Tamil Nadu, India | | | |  | | Expert in Cement and Concrete Technology, Mineral Deposits: Evaluation for Construction
Expert is a construction materials researcher with a highly successful track record in breakthrough developments in low-porosity, high-strength concrete and subterranean cement grouts using fly ash. He is adept at problem analysis, practical ... See full profile | | Texas (TX), USA | | | |  | | Expert in Cement and Concrete Technology
Cement technology. Expert's background is in manufacturing processes in cement production. His experience is in various areas of process engineering, including equipment application and selection; design and ... See full profile | | Illinois (IL), USA | | | |  | | Expert in Glass and Ceramic Plant Design: Erection, Construction, Start-up and Operation
After 4 years of chemical engineering education, he studied in the Department of Glasses, Ceramics and Polymers of Sheffield University, UK where he has obtained M. Sc. and Ph.D. degrees. Following this, he has spent most of his early professional life in ... See full profile | | Turkey | | | |  | | Expert in Computational Fluid Dynamics
Expert has extensively worked on computational fluid dynamics (CFD) simulations. He has developed new products that enable effective flow control and filtering based on CFD modeling, improving performance up to twice the efficiency compared to ... See full profile | | Missouri (MO), USA | | | |  | | Expert in Coating, Insulation, PFP and TSA, Oil and Gas Industry Worldwide
He has used various types of abrasives for blast cleaning of various substrates. Carbon steel, Stainless steel and Concrete. The abrasives used are copper slag /coal slag / Garnet / Aluminum oxide. He has also used metallic abrasives like chilled Iron ... See full profile | | Singapore | | | |  | | Expert in Corrosion and Material Selection: Galvanizing, Chemical Compatibility, Metallurgy, ASM, SCC, etc.
Expert has over 35 years of experience in practical aspects of materials utilization involving steels, stainless steels, nickel and nickel alloys, copper and copper alloys, aluminum and aluminum alloys, and titanium and titanium alloys in many ... See full profile | | New Jersey (NJ), USA | | | |  | | Expert in Waterway Project Planning & Engineering Design, EIS's, Permitting, Contaminated Sediment Remediation
Land-Forming and Waterway Engineering Project Development The processes associated with stepping through the “Project Continuum” associated with today's high complexity/high diversity land-forming and waterway engineering projects are overwhelming. See full profile | | Washington (WA), USA | | | |  | | Expert in Building Thermal Insulation Products and Systems
Expert has expertise in building and construction products, specifically in new product research, product improvement, cost reduction, and market acceptances. He has extensive experience in building materials properties and ... See full profile | | Florida (FL), USA | | | |  | | Expert in Concrete Technology, FRC, HPC, HVFA, SCC, Use of Byproducts in Cement-based Materials
He has used his 20 years of research experience in concrete technology to utilize other materials, fine aggregates (sand) and coarse aggregates, in concrete. He has explored the possibility of using coal fly ash, bottom ash, waste foundry sand, and ... See full profile | | Punjab, India | | |  | | >> Next 25 Experts
|
|
| |
|
